Fiber proof testers are designed to apply a set load to a fusion-spliced optical fiber in order to test the potency of the spliced fiber. Our fiber proof testers are available in both linear and rotary designs, for both proof and tension testing. Fiber proof testers are available for solitary mode, multimode, and polarization-maintaining fibers. Pick from dedicated, stand alone systems or multipurpose designs which are also capable of stripping, cleaning, cleaving, splicing, or recoating.

Fiber Recoaters with Proof Testers offer easy, integrated methods to recoat and secondary coating line. The fiber recoating process restores the barrier coating to a stripped fiber, offering more flexibility when compared to a heat-reduce safety sleeve, enabling so that it is dealt with and coiled without damaging the fusion-spliced section. The incorporated linear or rotary evidence tester enables users to right away check a recoated fiber using a pre-determined load and find out the long-term reliability of the fiber. Because of the capacity to recover a fusion-spliced fiber to close to initial problem, these systems are best for programs including undersea optical fiber wires, submarine communication wiring, fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The process starts with the fusion-spliced portion of fiber becoming placed in the middle of the mold assembly (see image for the right). Once set constantly in place, inserts inside the fiber obstructs safe the spliced fiber in place. Recoat materials is motivated in to the cavity and then Ultra violet-cured. The recoated fiber can then be analyzed by pulling into it as much as a pre-decided load.

Recoater and Mold Set up Choices – Recoaters can be found with either a computerized or handbook mold set up. The automatic mold assembly features pneumatic control of the mold dishes and is also optimized for high-volume production applications. Manual mold assemblies, around the other hand, use hinged mold plates that offer more versatility and are best for low-volume production or R&D applications. A computerized or handbook volumetric dispensing water pump and shot system is utilized to inject the recoat material to the mold cavity.

The PTR208 automatic recoater arrives regular having a mold assembly for secondary coating line; For our manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up is sold separately so that clients can choose the right mold coating size for his or her application. Custom mold covering dimensions are available approximately . Pre-installing of the mold set up on the factory can also be readily available. Contact Tech Support for additional info on custom molds or manufacturer set up.

We provide you with both high-index (Item # AB950200) and reduced-directory (Product # PC373) recoat materials to use in these recoaters. Recoaters with manual injection pumps (Product #s PTR206B and PTR307B) are compatible with each varieties of recoat materials; all other recoaters are suitable for the top-directory materials only. Our manual recoaters with the automatic injection system (Product #s PTR206 and PTR307) can be personalized to work with both the reduced- and-index recoat materials; make sure you contact Technology Support to learn more.

Evidence Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an incorporated linear evidence tester, that takes the SZ stranding line to your predetermined load (20 N) and after that produces it. The linear evidence tester utilizes the identical fiber holding blocks since the recoater and therefore the fiber does not must be relocated just before testing. The PTR307 and PTR307B Fiber Recoaters come with a built-in rotary proof tester, which can carry out both evidence and stress assessments (89 N). One set of proof test grips is included; replacement proof test bpabim can be purchased listed below in packs of 10. Each testing process is completely programmable through the provided handset or tablet control, allowing the user to pick guidelines like the load, the rate where the load is used, and also the hold time.

Inserts for Fiber Keeping Obstructs – As well as the previously mentioned, we provide you with many different inserts for use in the fiber holding obstructs in the recoaters in order to support a wide range of fiber covering diameters. For recoaters having a rotary proof tester, the inserts are appropriate for fiber covering diameters inside a range from 125 to 900. For recoaters using a linear evidence tester, the inserts cover a range for fiber films?.

Secondary Coating Line – Take A Look At This..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.